Install and start PKM-Claw

1. Requirements

• Validated ESP32-S3 N16R8 board
• USB data cable
• Current Chrome or Edge desktop browser
• Internet access to load the public installer

2. Flash

Open the Flash Online page, click Install PKM-Claw, choose the correct ESP32-S3 serial port and wait for completion.

3. First boot

If the board does not reboot automatically, press RESET/EN once.

4. Provision

Join PKM-Claw-Setup and open http://192.168.4.1. Enter your Wi-Fi credentials and save.

5. Configure AI

Set the supported API base, API key and model, then run the LLM connection test.

6. Build

Use Chat/Voice, hardware discovery, live monitoring, displays, rules, automations and diagnostics.